ABL Technology

(863) 439 6066

2006 Mori Seiki NH-4000 DCG Fanuc MSX-501

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:


The NH5000 DCG is one of the NH Series' leading machines. It uses “Driven at the Center of Gravity” technology and boasts the highest speed in its class. Customers can choose from 40 and 50 taper spindles. The 40 taper spindle offers both a space-saving design and a large work envelope, while the 50 taper spindle offers the strongest cutting ability. The machine's Direct Drive Motor (DDM®) technology provides outstanding transmission efficiency and a high-speed feed with zero backlash.
Moving parts are guided and driven with perfect balance at their center of gravity by the “Box-in-Box” Construction, which supports the saddle at both ends.  At the same time, they have improved the servo motor’s traceability, allowing higher speed and greater acceleration than ever before.
DCG “Driven at the Center of Gravity” technology controls vibration, which is one of the main enemies of high speed and high precision, by driving structural parts at their center of gravity.  For positioning, machines with DCG virtually eliminate vibration, while machines without DCG continue to vibrate for a long time. DCG controls the rotational vibration which appears at every acceleration start point, and which is proportional to the distance between the drive point and the center of gravity. This prevents deterioration of the quality of the machined surface.
For the spindle drive, they use the high-efficiency DDS (Direct Drive Spindle) motor which extracts full power over a wide range, from high-speed machining to heavy-duty cutting. This machine handles all types of materials from steel to aluminum and other non-ferrous metals.  Boring up to 500 mm (19.6 in.) can be done without turning the B-axis, reducing cutting time and achieving high precision machining.
Until now, gears have been used to transmit the drive power to the rotary axes, but this drive system had a negative effect on drive speed and precision. By transmitting the drive power to the rotary axes directly without using gears, DDM offers outstanding transmission efficiency and high-speed feed.  DDM also achieves zero backlash.


Pallet Size / Number of Pallets 15.7"x15.7"/2 plts.
Table Indexing .001 Degree Rotary
Table Load Capacity 880 lbs.
X-Axis Travel 22.04"
Y-Axis Travel 22.04"
Z-Axis Travel 24.8"
Spindle Nose CAT # 40
Spindle Speeds 14,000 RPM
Spindle Motor 30 Min. / Cont. 25 HP / 20 HP
Tool Magazine Capacity 120 Position ATC
Max. Tool Diam./Length/Weight 5.9"/14.2"/26.4 lbs.
Tool Change Time-tool to tool 1.3 seconds
Rapid Traverse Rates 1969 IPM
Machine Dimensions 90.6"x148"x88.4"
Machine Weight 21,340 lbs.

Equiped with

Full 4th Axis Rotary Table
Coolant Thru the Spindle Interface
Renishaw NC 4 Laser Tool Presetter
Renishaw MP700 Spindle Probe
Chip Blaster
Big Plus/Flange Contact Spindle
Additional Work Coordinates, 48 Sets
Tool Life Management
Additional Block Skip, 2-9 w/High Speed Skip Function
Additional 600 Custom Macro Variables
Extended Part Program Storage, 2560 Meters
Cooljet HP Coolant System
Tool Life Management
Flood Coolant Chip Conveyor
Dual Ballscrew Rigidity
All Availabale Manuals
(55) CAT 40 Tool Holders
(4) Tombstones
Paid $336k new