ABL Technology

(863) 439 6066

2008 Haas SL-20T w/ Servo 300 Barfeeder Haas 32 BIT


The Haas SL-20T is a 2 axis lathe.  The "T" used in the machine description references that it offers a tailstock on the machine.  This is commonly a 8.25" hydraulic chuck machine that offers great flexibility for all sizes of shops. It would make a perfect fit whether it were to be in a smaller job shop, or a larger production oriented parts producer.
The SL-20T is a machine that is thought to have replaced the original Haas HL-2 series lathe which was also prone to generally use a 8" chuck.  They use a rigid cast iron base as its foundation and for all its major components.  The castings are reinforced internally with heavy ribs to resist flex and dampen vibrations.  The symmetric ribs are used to increase rigidity and improve thermal stability.  The SL series offers three types of turrets, the most common bolt-on type, which uses bolt on blocks to the OD of the turret, the optional VDI style, which uses ID locations, and the hybrid type, which uses both ID and OD locations.   The SL-20T uses a vector spindle drive and was available with a 2 speed geared head option.  They used linear guide railways for high accuracy and repeatability.    The SL-20T was offered with a variety of options including, but not limited to, chip auger or conveyor, parts catcher, tool presetter, barfeeder, automatic door, remote jog handle and more.    The SL-20 first made its appearance on the market in the later 1990's and was produced for roughly 10 years before being replaced by a newer model.


Chuck Size 8" Hyd.Chk & Collet Chk
Maximum Swing Over Bed/Cross Slide 23" / 9.5"
Maximum Turning Diam. / Length 10.3"/20"
Center Distance 24"
Maximum Bar Capacity 2.0"
X-Axis Travel 8.45"
Z-Axis Travel 20"
Spindle Nose / Spindle Bore A2-6" / 3.0"
Spindle Speed 4,000 RPM
Spindle Motor / Torque 20 HP / 120 ft/lbs.
Turret Type 10 Position Turret
Rapid Traverse Rates 710 IPM
Tailstock Taper / Travel MT #4 / 20"
Machine Dimensions 126.5" x 62" x 72"
Machine Weight 9,000 lbs.

Equiped with

Haas Servo Bar 300 Barfeed
Collet Chuck
8" 3-Jaw Hydraulic Chuck
Fully Programmable Tailstock
Tool Presetter
Chip Auger
Parts Catcher *No Basket*
High Intensity Lighting
USB Port Interface
RS 232 Port Interface
All Available Manuals
All Available Tool Blocks
Some Aluminum Soft Jaws
677 Cycle Start Hours
542 Feed Cutting Hours




Please call us for pricing on this machine at (863) 439-6066.

Please enter your email address below to login & get pricing information.