ABL Technology

(863) 439 6066


2016 Hurco TM-6i Hurco Max

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Description

The TM turning centers are designed for general purpose turning applications and provide an easy transition from manual turning or milling.
Major structural components use thick-walled, fine-grain cast iron including the machine base, head stock, and cross slide. The rigid one-piece machine base casting is designed to yield excellent static and dynamic performance in addition to outstanding dampening properties that inhibit thermal deformation and twisting.  The box type cross slide ensures the turret remains rigid and stable even during interrupted cuttting. Hurco uses extra wide linear guide ways that are designed for support to the cross slide.
The slotted tool turret provides fast and accurate tool indexes (1.5 seconds to index to the oppisite turret position). Every tool position can accomodate any combination of ID and OD tool holders. The turret uses a large curvic coupling for accurate location and clamping. Despite the small footprint, a wide range of parts are handles by the generous turning diameter and turning

Specifications

Chuck Size 6" 3-Jaw Hydraulic Chuck
Maximum Cutting Diameter 12.4"
Swing Over Cross Slide 9.4"
Maximum Cutting Length 13.4"
Distance Between Centers 15.8"
Maximum Bar Capacity 1.77"
X-Axis Travel 7"
Z-Axis Travel 14"
Spindle Nose / Bore A2-6" / 2.625"
Spindle Speed 6,000 RPM
Spindle Motor 17.5 HP
Number of Turret Positions 12 Position Turret
Rapid Traverse Rates X/Z 750 IPM / 945 IPM
Tailstock Quill Dia. / Center n/a
Machine Dimensions LxWxH 71" x 55" x 60"
Machine Weight 7,010 lbs

Equiped with

6" 3 Jaw Hydraulic Chuck
Tailstock
Remote Jog Handle
USB Port Interface
Ethernet Interface
Flood Coolant System
All Available Manuals
All Available Tooling
Machine Power On Hours 299
Spindle Run Hours 139
Wired 230V Electrics

Condition

Excellent