ABL Technology

(863) 439 6066

2013 Okuma LT2000 EX-2TMY OSP-P300L

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:


Our LT2000 EX is our highly flexible and profitable twin-spindle turning center in the 6-inch chuck class. With the ability to combine the upper and lower turrets with either spindle, this machine enables process flexibility, very high feature utilization, and the ability to complete the greatest amount of primary and secondary machining possible in one compact platform. The machine can be specified in a large number of different configurations to maximize the benefits for specific circumstances. It is available in either 2- or 3-turret versions—with or without Y-axis—to provide the best process balance and production throughput and integrated operations. This multi-function horizontal twin-spindle machine integrates lathe and mill/drill functions on all turrets. Thirty-two tool stations are available for either mill or lathe function for the twin-turret machine, while there are 48 for the 3-turret machine.
The LT2000 EX uses our open-architecture, PC-based OSP-P300 control. With attention to how machinists actually operate machine tools, this control was created with “Easy Operation,” where commonly used processes are conveniently grouped together. This creates an efficient platform for both novice and experienced machinists to efficiently complete their tasks.


Chuck Size (2) 6" Hyd
Swing Over Bed 15.75"
Maximum Turning Diameter 8.27"
Maximum Turning Length 27"
Bar Capacity (main) 2.00"
X1 & X2-Axis Travels 8.07" / 8.07"
Z1 & Z2-Axis Travels 28.74" / 28.74"
Y1 / Y2 Axis Travels 3.74"
C-Axis Movement Main / Subspindle .001 Full C
Spindle Speed / Subspindle Speed 5,000 RPM / 6,000 RPM
Spindle Motor Left / Right 30 HP / 15 HP
Number of Turret Positions U / L 16 Positions/16 Positions
Machine Dimensions n/a
Machine Weight n/a

Equiped with

Two Spindle Design
Two Turret Design w/ Upper and Lower
Y Axis Capability on Upper only
Full C Axis Spindle Rotation - Both Spindles
(2) 6" 3 Jaw Kitagawa Hydraulic Chucks
(2) ATS 3J Collet Noses
LNS 80S Short Bar Feeder
Chip Conveyor
Parts Catcher w/ Work Ejector
Touch Setter
3.5" Floppy Disk Drive Interface
RS 232 Port Interface
All Available Tooling
(includes 18 rotary tool holders)
All Available Manuals
Only 2786 Cutting Time


Very Good