ABL Technology

(863) 439 6066

1997 Haas VF2B Haas 32 BIT

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:


The Haas VF-2 has a powerful 7,500 RPM, oil cooled spindle that is driven by a two seed geared head and a 10 HP motor producing a generous 160 ft-lbs of torque. The rugged two speed geared head provides a much more efficient method of transmitting power than V-belt designs used on other VMCs.  With gears, higher reduction ratios are achieved due to their constant engagement, no slip nature.  Efficiency is so high that the VF2’s produce their greatest torque at very low speeds.  Maximum torque is delivered at just 500 RPM.   The VF-2 is built around a wide base, cast-iron rigid frame.
The fast 32 bit, 68030 processor provides execution of 400 blocks per second and 800 optional.  Whether you’re operating Fanuc, Yasnac or other EIA type programs the Haas controls can be loaded and run with little or no program modifications.  Operational simplicity extends to one button tool length measurement, dry run graphics, background program editing, DNC link and more.  There’s even an on-line help menus that solves trigonometry, circular and speed/feed calculations.  The Haas control is one of the easiest to use in the industry.  Advanced canned cycles, such as helical milling, bolt hole routines, and many other milling capabilities are all standard.  There is an on-line help manual installed to explain different features and how they work.  Doing your trigonometry calculations has never been easier.  Input 3 elements of a triangle and the Haas control will calculate the rest.  It even has a math calculator.  Graphically display your moves before running your first part so you can catch any errors.  Quickly and confidently debug your programs.
Each VF2 has a 20 position automatic tool changer that is fully enclosed that eliminates the possibility of contamination from chips.  The ATC is bi-directional so when changing tools the shortest and fastest path to the next tool is automatically selected.
There is a built-in auger style conveyor that channels chips down the enclosed path and out the exhaust tube.  This system provides the utmost in productivity.  Its load sensing capabilities detect any overload condition and initiates a clearing cycle.  By alternating between forward and reverse, obstructions are cleared with no intervention by the machine operator.


Table Size 36" x 14"
Table Load Capacity 1,000 lbs.
X-Axis Travel 30"
Y-Axis Travel 16"
Z-Axis Travel 20"
Spindle Taper CAT 40
Spindle Speed 0 - 7,500 RPM
Spindle Motor 10 HP
Transmission 2 Speed Geared
Spindle Nose to Table Top 4" to 24"
Tool Magazine Capacity 20 Position ATC
Max. Tool Diameter/Weight 3.5" / 12 lbs.
Rapid Traverse Rates 710 IPM
Machine Dimensions LxWxH 88" x 92.5" x 104"
Machine Weight 8,000 lbs.

Equiped with

4th Axis Wired
Rigid Tapping
2 Speed Geared Transmission
Status Condition Lightpost
3.5" Floppy Disk Drive
All Available Manuals