ABL Technology

(863) 439 6066


1982 Broadbent BL16HSK (16.375" Bore)

Description

With a heritage dating back to the 1870’s, Broadbent Stanley have been making quality machine tools in the United Kingdom used in the power generation, rail, construction, aerospace, chemical and oil and gas industries. The BL16HSK is a unique hollow spindle 16 3/8” bore flat bed lathe using pre-loaded quality Timken bearings and the leadscrew that is kept under constant tension in both directions. This machine comes equipped with a unique Semi-Automatic Inch/Metric Threading capability. A series of trips are mounted on a trip rail mounted at the front of the machine which controls the Tool Withdrawl, Stop Feed and return saddle to the start of cut, Open apron nuts and return saddle to start of cut, Stop saddle rapid traverse at start of cut and return tool slide to work. Once trips have been set up properly it is only necessary for the operator to control the depth of cut with the handwheel at the start of each pass. There is a Hydraulic Taper Attachment with a range of 20 degrees over a distance of 20” that can be used for either internal or external tapers. The Headstock bearings and gears are lubricated by a motorized pump ensuring an ample supply of oil under all operating conditions to obtain the 18 Spindle Speeds. The machine is powered by a 30 H.P. main motor and a 2 H.P. power traverse motor. This machine is ideal for turning and threading large pipe and or large shafts.

Specifications

Chuck Size 30" 4 Jaw w/ 16.375" Bore
Swing Over Bed 34"
Swing Over Cross Slide 25.5"
Swing Over Gap 56"
Length of Gap 17"
Distance Between Centers 120"
Spindle Bore 16.375"
Spindle Speeds 21 - 350 RPM
Spindle Motor 30 HP
Tool Post 4 Way Post
Tailstock Taper MT # 5
Tailstock Quill Diameter / Travel 3.94" / 11.03"
Machine Dimensions LxWxH 260" x 100.39" x 90.55"
Machine Weight 33,000 lbs.

Equiped with

(2) 30" 4-Jaw Chuck w/16.375" Bore
Hydraulic Taper Attachment
20 Degree Included Angle Range 20" Max Length of Taper
Hydraulic Semi-Automatic Threading
Auto Kickout
Trip Rail Mounted on the Front of the Machine for Auto Tool Withdrawl
Stop Feed & Return Saddle to Start of Cut
Auto Cycle
Inch/Metric Threading
2 HP Rapid Traverse Motor
Rapid Traverse
Electro Magnetic Clutch
Tailstock
Coolant Pump
Soft Starter replaced in 2014

Condition

Good

Price

Please call us for pricing on this machine at (863) 439-6066.

Please enter your email address below to login & get pricing information.
*RETURNING CUSTOMERS ONLY NEED ENTER EMAIL ADDRESS FOR PRICING*