ABL Technology

(863) 439 6066

2005 Okuma Ace Center MB-46VAE OSP P-100


The Okuma Ace Center MB-56VA adopts an extremely rigid double column structure to offer the most machining in the least amount of floor space. Okuma’s Thermo-Friendly Concept is standard on this machine for unrivaled dimensional stability over long continuous runs.  The Okuma MB-56V is equipped with a high speed; high power 40 Taper 8,000 rpm Coolant Thru the spindle with a 15 hp VAC integral motor and bidirectional spindle cooling. This model incorporates a high-speed 32 position automatic tool changer and a 1,574 ipm rapid traverse, resulting in a powerful production capability.
As machine s become more complex, there is more room for human error.  Okuma’s Collision Avoidance System (CAS) integrates 3D modeling of their machines, blanks and tooling with the power of the THINC-OSP Control to create a virtual machine. By running the real-time virtual application seconds ahead of the actual cutting, problems can be detected early and the machine stopped before a costly collision.
CAS generates the actual and exact shape of the materials milliseconds ahead of a cut to confirm that no interference take place.  Virtual Modeling requires exacting dimensions and definitions that only Okuma can deliver.
Chatter if fairly common in the world of CNC machining.  Okuma Machining Navi chooses and optimal speed(s) at which the machine can avoid chatter, thereby saving operator time and maximizing productivity.  Okuma invented Machining Navi, an optional function that uses the THINC-OSP control and sensors to monitor chatter.  If chatter is detected, the function then either recommends spindle speed changes or automatically makes the spindle speed adjustments.
Okuma’s Thermo-Friendly Concept combines control technology and machine design to both minimize the amount of heat generated and deal with the heat that cannot be eliminated. Coupled with extremely accurate thermal deformation compensation, the benefit is unrivaled dimensional stability over long, continuous runs.  You no longer waste time and money warming machines up, thus requiring manual adjustments for temperature changes.
The Okuma Ace Center MB-56VA with the OSP-P200MA-H control is a compact designed machining center that is equipped with multiple safety and friendly features to satisfy your production requirements.


Table Size 39.3" x 18.1"
Table Load Capacity 1,980 lbs.
X-Axis Travel 30"
Y-Axis Travel 18.11"
Z-Axis Travel 18.11"
Spindle Taper CAT #40
Spindle Speeds 15,000 RPM
Spindle Motor 15 HP
Maximum Spindle Torque 147 ft./lbs.
Tool Magazine Capacity - Side Mount 20 Pos. ATC
Tool Change Time 1.2 seconds
Maximum Tool Diam./Length/Weight 4.92"/11.81/17.6 lbs.
Rapid Traverse Rates X, Y / Z 1575/1260 IPM
Maximum Cutting Feedrate 1260 IPM
Machine Dimensions 110"x88"x105"
Machine Weight 13,900 lbs.

Equiped with

15,000 RPM Spindle
Renishaw NC Laser 1 Tool Setting Probe
Renishaw MP-700 Part Probe w/ MI 12 Unit
Ryosei Dust Collector Unit
Dual Auger System with Chip Conveyor
Rigid Tapping
20 Position Side Mount ATC
RS-232 Port Interface
3.5" Floppy Disk Interface
USB Port Interface
37 GB Memory
Windows XP Pro Software
Helical Interpolation
All Available Manuals
Complete Coolant System w/ Tank & Pump




Please enter your email address below to login & get pricing information.