The GANESH CYCLONE-32 CS is a 7-axis 1.25” (32mm) bar diameter sliding headstock CNC lathe without a guide bushing, which facilitates faster setups, greater workpiece concentricity, and superior cutting rigidity over conventional Swiss-style lathes. The CYCLONE-32 CS configuration allows for short cycle-times because the Counter Spindle can work simultaneously with the Main Spindle. The CYCLONE-32 CS does not require the use of ground barstock or a guide bushing like the Swiss-style machines must use, this together with the much shorter bar remnant, represents additional profitability when using this machine design. The CYCLONE-32 CS CNC screw machine configuration also allows for shorter cycle times due to the enhanced machine rigidity and the ability to aggressively rough cut and then finish with a second tool, all while achieving much greater tool life. The CYCLONE-32 CS can use as many of the 27-available tools as necessary to rough and finish features on the workpiece. Swiss machines cuts are limited to the length of the guide bushing, and longer cuts must be micro-fed at full depth with one-tool in just one-pass which burns up expensive tooling. These advantages are particularly evident in tougher materials where the capability of the Cyclone 32CS excels.