2006 Nakamura Tome TW-20MM
2006 Nakamura Tome TW-20MM
$134.950 (USD)
Ubicación:Massachusetts
o
Llamar (863) 439-6066
Descripción
Twin Facing Spindles Design
Full "C" Axis Spindle Rotation Both Spindle
Live Milling / Drilling Capability on Both Turrets
Collet Chuck - Both Spindles
Barfeed Interface
LNS Quick Load Servo S3 Short Bar Feed Unit
Parts Catcher on Both Sides
Chip Conveyor
2.5" Bar Capacity Option on Left Spindle
High Pressure Coolant Pump - Both Sides
Coolant Tank with Pumps
3.5" Floppy Disk Interface
RS232 Port Interface
(2) Live Tool Holders per Turret Included
(2) Boring Bar Holders per Turret
(2) Turning Holders per Turret
**Machine is in excellent condition ready to ship**
**ONLY 5,540 Total Cutting Hours**
Especificaciones
| Fabricante | Nakamura Tome |
| Modelo | TW-20MM |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 118458 |
| Control | Fanuc 18i-TB |
| Chuck Type Left / Right Spindle | Collet Chuck / Collet Chuck |
| Maximum Swing Bed Left / Right | 10.63" / 8.46" |
| Maximum Turning Diameter | 10.63" |
| Maximum Turning Length | 7.56" |
| Distance Between Spindles | 42.52" |
| Maximum Bar Capacity Left Side / Right Side | 2.5" / 2.0" |
| X-Axis Travel (Both Sides) | 7.68" |
| Z-Axis Travel (Left / Right) | 10.43" / 30.71" |
| C Axis Spindle Rotation - Both | .001 Degree |
| Spindle Nose / Spindle Bore Left / Right | A2-6" / 3.15" / 2.56" |
| Spindle Speed Left / Right | 4,500 RPM / 5,000 RPM |
| Spindle Motor - Both 30 minutes/continuous | 20 HP / 15 HP |
| Rotary Tool Speed / Rotary Motor | 3,600 RPM / 5 HP |
| Number of Turret Positions - Both | 12 Station each |
| Rapid Traverse Rates X / Z | 630 IPM / 1181 IPM |
| Machine Dimensions | 137" x 83" x 85" |
| Machine weight | 17,160 lbs. |