2004 Daewoo Puma 400C with 7" Bar Capacity, 18" 3 Jaw Air Chuck, Rear Manual Chuck, Conveyor, Tailstock
2004 Daewoo Puma 400C with 7" Bar Capacity, 18" 3 Jaw Air Chuck, Rear Manual Chuck, Conveyor, Tailstock
$47.500 (USD)
Ubicación:Texas
o
Llamar (863) 439-6066
Descripción
7" Big Bore Spindle Option
Chip Conveyor
18" 3 Jaw Air Chuck
Rear 4 Jaw Manual Chuck
Programmable Tailstock
3.5" Floppy Disk Interface
RS 232 Port Interface
Coolant System with Tank & Pump
Boxed Way Construction on Slant Bed
All Available Tooling
All Available Manuals
Especificaciones
| Fabricante | Daewoo |
| Modelo | Puma 400C |
| Año | 2004 |
| Condición | Usado |
| Número de Stock | 119856 |
| Control | Fanuc 21i-TB |
| Chuck Size | 18" 3 Jaw Air Chuck / Rear 4 Jaw Manual Chuck |
| Maximum Swing | 30.31" |
| Maximum Turning Diameter | 21.7" |
| Maximum Turning Length | 41" |
| Maximum Bar Capacity | 7.1" |
| X-Axis Travel | 14.25" |
| Z-Axis Travel | 43.5" |
| Spindle Nose / Spindle Bore | A2-15" / 7.1" |
| Spindle Speeds | 20 - 2,000 RPM |
| Spindle Motor | 50 HP |
| Transmission | 2 Speed Gearbox |
| Number of Turret Positions | 10 Position Turret |
| Rapid Traverse Rates X/Z | 630 IPM / 790 IPM |
| Tailstock Quill Diameter / Center | 4.7" / MT #5 |
| Tailstock Quill Travel | 4.7" |
| Machine Dimensions | 201" x 94" |
| Machine Weight | 18,100 lbs. |