2012 Haas TL-2 with Tailstock, 10" 3 Jaw Chuck, Tool Post, Chuck Guard, Manual Hand Wheels
2012 Haas TL-2 with Tailstock, 10" 3 Jaw Chuck, Tool Post, Chuck Guard, Manual Hand Wheels
$22.500 (USD)
Ubicación:Carolina del Norte
o
Llamar (863) 439-6066
Descripción
10" 3 Jaw Manual Chuck
Tool Post
Roll up Operator Cover
Tailstock
Coolant System with Tank & Pump
Manual Hand Wheels
Integral Chip-Flow Channel
Flip Down Safety Enclosure
RS 232 Port Interface
Vector Drive Spindle
Machine can be run at either 208V Three Phase or 240V Single Phase Power
Especificaciones
| Fabricante | Haas |
| Modelo | TL-2 |
| Año | 2012 |
| Condición | Usado |
| Número de Stock | 119923 |
| Control | Haas CNC Control |
| Chuck Size | 10" 3 Jaw Chuck |
| Maximum Swing over Bed | 20" |
| Maximum Swing Over Cross Slide | 11" |
| Maximum Cutting Diameter | 16" |
| Maximum Machining Length | 48" |
| X-axis travel | 8" |
| Z-Axis Travel | 48" |
| Spindle Nose / Spindle Bore | A2-5" / 2.31" |
| Spindle Speeds | 1,800 RPM |
| Spindle Motor | 10 HP |
| Number of Turret Positions | Tool Post |
| Rapid Traverse Rates X/Z | 450 IPM / 450 IPM |
| Machine Dimensions | 100" x 55" x 80" |
| Machine Weight | 5,000 lbs. |