2017 Doosan Puma 2600SY II
2017 Doosan Puma 2600SY II
$149,500 (USD)
Location:Pennsylvania
Description
Full C Axis Spindle Rotation - Both
Live Milling/Drilling Capability
Subspindle Y Axis Capability
LNS Quick Load 80 S2 Servo Barfeeder
Barfeed Interface
10" 3 Jaw Hydraulic Chuck on Main Spindle
8" 3 Jaw Hydraulic Chuck on Subspindle
Tool Presetter
Chip Conveyor
Parts Catcher
Parts Exit Conveyor
Oil Skimmer
High Pressure Coolant Pumps
Coolant System with Tank & Pumps
Royal Filtermist FX575 Mist Collector
PCMCIA Card Interface Ethernet Interface RS 232 Port Interface Boxed Ways (2) X-Axis Radial Live Holders
(3) Z-Axis Axial Live Holders
Assortment of Static Tool Holders
**Cutting Hours as of September 2024 - 5,278 Hours**
**Machine has primarily cut steel (1018 & 1025)**
**One Owner Machine, in Plant and Under Power*
**Estimated replacement cost as equipped, $230,000 plus**
**Tooling displayed on table in photos IS included, Tooling seen on turret in photos IS NOT included**
Specifications
| Manufacturer | Doosan |
| Model | Puma 2600SY II |
| Year | 2017 |
| Condition | Used |
| Stock Number | 119693 |
| Control | Fanuc i Series Control |
| Chuck Size | 10" 3-Jaw Main Spindle / 8" 3-Jaw Subspindle |
| Maximum Swing over Bed | 30.7" |
| Maximum Cutting Diameter | 14.8" |
| Maximum Machining Length | 29.9" |
| Maximum Bar Capacity | 3" Main Spindle / 2" Subspindle |
| X-Axis Travel | 10.2" |
| Y-Axis Travel | 4.13" |
| Z-Axis Travel | 32.7" |
| C Axis Spindle Rotation - Both | .001 Degree |
| Spindle Nose / Spindle Bore | A2-8" Main Spindle / A2-5" Subspindle / 3.6" Main Spindle Bore / 2.4" Subspindle Bore |
| Spindle Speeds - Main | 4,000 RPM |
| Spindle Motor - Main | 30 HP |
| Subspindle Speed / Motor | 6,000 rpm / 20 HP |
| Rotary Tool Speed / Rotary Motor | 5,000 RPM / 10 HP |
| Number of Turret Positions | 12 Station Turret - BMT 65 |
| Rapid Traverse Rates X, Z / Y | 1181 IPM / 394 IPM |
| Machine Dimensions | 172" x 85" x 86" |
| Machine Weight | 16,100 lbs. |