2006 Haas TL-1 w/ Tailstock, 8" 3 Jaw Chk, 4 Way Tool Post, 3.5" Floppy Interface, Single or Three Phase Capable, LOW Hrs from Tech School

No longer available
2006 Haas TL-1 w/ Tailstock, 8" 3 Jaw Chk, 4 Way Tool Post, 3.5" Floppy Interface, Single or Three Phase Capable, LOW Hrs from Tech School
Location:Missouri
Description
8" 3 Jaw Manual Chuck
4-Position Tool Post
Tailstock
Manual Hand Wheels
Haas Intuitive Turning System
1 MB Program Memory Flip Down Safety Enclosure 3.5" Floppy Disk Interface RS 232 Port Interface Integral Chip-Flow Channel Vector Drive Spindle
Can be Wired at Either 208V Three Phase Power or 240V Single Phase Power
**Came out of a school**
**ONLY 300 Run Time Hours**
*This unit was purchased without a coolant tank/pump**
Specifications
Manufacturer | Haas |
Model | TL-1 |
Year | 2006 |
Condition | Used |
Stock Number | 119847 |
Control | Haas CNC Control |
Chuck Size | 8" 3 Jaw Chuck |
Maximum Swing over Bed | 16" |
Maximum Swing Over Cross Slide | 8.5" |
Maximum Cutting Diameter | 16" |
Maximum Machining Length | 30" |
X-axis travel | 8" |
Z-Axis Travel | 30" |
Spindle Nose / Spindle Bore | A2-5" / 2.31" |
Spindle Speeds | 1,800 RPM |
Spindle Motor | 7.5 HP |
Number of Turret Positions | 4 Way Toolpost |
Rapid Traverse Rates X/Z | 75 IPM / 150 IPM |
Machine Dimensions | 96" x 55" x 78" |
Machine Weight | 4,000 lbs. |